kkkjtr
/
bleSDK_expansion_board
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

优化代码结构等等 zsxfly20240511

This commit is contained in:
等你很久 2024-05-11 00:04:28 +08:00
parent d3db2cee3a
commit 5976e0c61c
21 changed files with 4606 additions and 3202 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4248
projects/blezongkong/mdk/JLinkLog.txt
View File

File diff suppressed because it is too large Load Diff

1941
projects/blezongkong/mdk/zhongkong.uvguix.zsx Normal file
View File

File diff suppressed because one or more lines are too long

120
projects/blezongkong/mdk/zhongkong.uvoptx
View File

@ -100,7 +100,10 @@
<tRSysVw>1</tRSysVw> <tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb> <sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime> <sLrtime>0</sLrtime>
<nTsel>6</nTsel> <bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>4</nTsel>
<sDll></sDll> <sDll></sDll>
<sDllPa></sDllPa> <sDllPa></sDllPa>
<sDlgDll></sDlgDll> <sDlgDll></sDlgDll>
@ -190,6 +193,16 @@
<LintExecutable></LintExecutable> <LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile> <LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto> <bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
<SystemViewers> <SystemViewers>
<Entry> <Entry>
<Name>System Viewer\UART1</Name> <Name>System Viewer\UART1</Name>
@ -210,7 +223,6 @@
<FileNumber>1</FileNumber> <FileNumber>1</FileNumber>
<FileType>2</FileType> <FileType>2</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\core\mdk\startup.s</PathWithFileName> <PathWithFileName>..\..\..\core\mdk\startup.s</PathWithFileName>
@ -231,7 +243,6 @@
<FileNumber>2</FileNumber> <FileNumber>2</FileNumber>
<FileType>5</FileType> <FileType>5</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\cfg.h</PathWithFileName> <PathWithFileName>..\src\cfg.h</PathWithFileName>
@ -244,7 +255,6 @@
<FileNumber>3</FileNumber> <FileNumber>3</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\main.c</PathWithFileName> <PathWithFileName>..\src\main.c</PathWithFileName>
@ -257,7 +267,6 @@
<FileNumber>4</FileNumber> <FileNumber>4</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\app_uart.c</PathWithFileName> <PathWithFileName>..\src\app_uart.c</PathWithFileName>
@ -270,20 +279,6 @@
<FileNumber>5</FileNumber> <FileNumber>5</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\app_speed_governor.c</PathWithFileName>
<FilenameWithoutPath>app_speed_governor.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\modules\src\sftmr.c</PathWithFileName> <PathWithFileName>..\..\..\modules\src\sftmr.c</PathWithFileName>
@ -293,10 +288,9 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber> <FileNumber>6</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\app_control_out.c</PathWithFileName> <PathWithFileName>..\src\app_control_out.c</PathWithFileName>
@ -306,10 +300,9 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>8</FileNumber> <FileNumber>7</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\app_ws2812.c</PathWithFileName> <PathWithFileName>..\src\app_ws2812.c</PathWithFileName>
@ -319,10 +312,9 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber> <FileNumber>8</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\src\app_ble_uart_proc.c</PathWithFileName> <PathWithFileName>..\src\app_ble_uart_proc.c</PathWithFileName>
@ -330,6 +322,42 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\app_radar.c</PathWithFileName>
<FilenameWithoutPath>app_radar.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\app_buzzer.c</PathWithFileName>
<FilenameWithoutPath>app_buzzer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\app_bat.c</PathWithFileName>
<FilenameWithoutPath>app_bat.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group> </Group>
<Group> <Group>
@ -340,10 +368,9 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>10</FileNumber> <FileNumber>12</FileNumber>
<FileType>5</FileType> <FileType>5</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\drivers\api\drvs.h</PathWithFileName> <PathWithFileName>..\..\..\drivers\api\drvs.h</PathWithFileName>
@ -353,10 +380,9 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>11</FileNumber> <FileNumber>13</FileNumber>
<FileType>4</FileType> <FileType>4</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\drivers\lib\drvs.lib</PathWithFileName> <PathWithFileName>..\..\..\drivers\lib\drvs.lib</PathWithFileName>
@ -374,10 +400,9 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>12</FileNumber> <FileNumber>14</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>1</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\modules\src\debug.c</PathWithFileName> <PathWithFileName>..\..\..\modules\src\debug.c</PathWithFileName>
@ -389,16 +414,15 @@
<Group> <Group>
<GroupName>ble\app</GroupName> <GroupName>ble\app</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>13</FileNumber> <FileNumber>15</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app.c</PathWithFileName>
@ -408,10 +432,9 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>14</FileNumber> <FileNumber>16</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app_actv.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app_actv.c</PathWithFileName>
@ -421,10 +444,9 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>15</FileNumber> <FileNumber>17</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app_gapc.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app_gapc.c</PathWithFileName>
@ -434,10 +456,9 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>16</FileNumber> <FileNumber>18</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app_gapm.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app_gapm.c</PathWithFileName>
@ -447,10 +468,9 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>17</FileNumber> <FileNumber>19</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app_gatt.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app_gatt.c</PathWithFileName>
@ -460,10 +480,9 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>18</FileNumber> <FileNumber>20</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\app\app_msg.c</PathWithFileName> <PathWithFileName>..\..\..\ble\app\app_msg.c</PathWithFileName>
@ -475,16 +494,15 @@
<Group> <Group>
<GroupName>ble\lib</GroupName> <GroupName>ble\lib</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>19</FileNumber> <FileNumber>21</FileNumber>
<FileType>4</FileType> <FileType>4</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\lib\ble6.lib</PathWithFileName> <PathWithFileName>..\..\..\ble\lib\ble6.lib</PathWithFileName>
@ -496,16 +514,15 @@
<Group> <Group>
<GroupName>ble\pre</GroupName> <GroupName>ble\pre</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>20</FileNumber> <FileNumber>22</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\prf\prf_diss.c</PathWithFileName> <PathWithFileName>..\..\..\ble\prf\prf_diss.c</PathWithFileName>
@ -515,10 +532,9 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>21</FileNumber> <FileNumber>23</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<Focus>0</Focus>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\ble\prf\prf_sess.c</PathWithFileName> <PathWithFileName>..\..\..\ble\prf\prf_sess.c</PathWithFileName>

80
projects/blezongkong/mdk/zhongkong.uvprojx
View File

@ -10,6 +10,8 @@
<TargetName>uartTest</TargetName> <TargetName>uartTest</TargetName>
<ToolsetNumber>0x4</ToolsetNumber> <ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName> <ToolsetName>ARM-ADS</ToolsetName>
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
<uAC6>0</uAC6>
<TargetOption> <TargetOption>
<TargetCommonOption> <TargetCommonOption>
<Device>B6x</Device> <Device>B6x</Device>
@ -123,47 +125,6 @@
<HexOffset>0</HexOffset> <HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen> <Oh166RecLen>16</Oh166RecLen>
</OPTHX> </OPTHX>
<Simulator>
<UseSimulator>0</UseSimulator>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>1</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
<RestoreSysVw>1</RestoreSysVw>
</Simulator>
<Target>
<UseTarget>1</UseTarget>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>1</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>6</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
</SimDlls>
<TargetDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver>Segger\JL2CM3.dll</Driver>
</TargetDlls>
</DebugOption> </DebugOption>
<Utilities> <Utilities>
<Flash1> <Flash1>
@ -222,12 +183,14 @@
<hadXRAM>0</hadXRAM> <hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam> <uocXRam>0</uocXRam>
<RvdsVP>0</RvdsVP> <RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<hadIRAM2>0</hadIRAM2> <hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2> <hadIROM2>0</hadIROM2>
<StupSel>0</StupSel> <StupSel>0</StupSel>
<useUlib>1</useUlib> <useUlib>1</useUlib>
<EndSel>0</EndSel> <EndSel>0</EndSel>
<uLtcg>0</uLtcg> <uLtcg>0</uLtcg>
<nSecure>0</nSecure>
<RoSelD>0</RoSelD> <RoSelD>0</RoSelD>
<RwSelD>0</RwSelD> <RwSelD>0</RwSelD>
<CodeSel>0</CodeSel> <CodeSel>0</CodeSel>
@ -348,7 +311,7 @@
</ArmAdsMisc> </ArmAdsMisc>
<Cads> <Cads>
<interw>1</interw> <interw>1</interw>
<Optim>0</Optim> <Optim>4</Optim>
<oTime>0</oTime> <oTime>0</oTime>
<SplitLS>0</SplitLS> <SplitLS>0</SplitLS>
<OneElfS>1</OneElfS> <OneElfS>1</OneElfS>
@ -361,9 +324,15 @@
<uThumb>0</uThumb> <uThumb>0</uThumb>
<uSurpInc>0</uSurpInc> <uSurpInc>0</uSurpInc>
<uC99>1</uC99> <uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO> <useXO>0</useXO>
<v6Lang>1</v6Lang> <v6Lang>1</v6Lang>
<v6LangP>1</v6LangP> <v6LangP>1</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls> <VariousControls>
<MiscControls>--c99 --gnu --thumb --bss_threshold=0 --preinclude=..\src\cfg.h</MiscControls> <MiscControls>--c99 --gnu --thumb --bss_threshold=0 --preinclude=..\src\cfg.h</MiscControls>
<Define></Define> <Define></Define>
@ -381,6 +350,7 @@
<NoWarn>0</NoWarn> <NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc> <uSurpInc>0</uSurpInc>
<useXO>0</useXO> <useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls> <VariousControls>
<MiscControls>--thumb</MiscControls> <MiscControls>--thumb</MiscControls>
<Define></Define> <Define></Define>
@ -436,11 +406,6 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\src\app_uart.c</FilePath> <FilePath>..\src\app_uart.c</FilePath>
</File> </File>
<File>
<FileName>app_speed_governor.c</FileName>
<FileType>1</FileType>
<FilePath>..\src\app_speed_governor.c</FilePath>
</File>
<File> <File>
<FileName>sftmr.c</FileName> <FileName>sftmr.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -461,6 +426,21 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\src\app_ble_uart_proc.c</FilePath> <FilePath>..\src\app_ble_uart_proc.c</FilePath>
</File> </File>
<File>
<FileName>app_radar.c</FileName>
<FileType>1</FileType>
<FilePath>..\src\app_radar.c</FilePath>
</File>
<File>
<FileName>app_buzzer.c</FileName>
<FileType>1</FileType>
<FilePath>..\src\app_buzzer.c</FilePath>
</File>
<File>
<FileName>app_bat.c</FileName>
<FileType>1</FileType>
<FilePath>..\src\app_bat.c</FilePath>
</File>
</Files> </Files>
</Group> </Group>
<Group> <Group>
@ -552,4 +532,10 @@
</Target> </Target>
</Targets> </Targets>
<RTE>
<apis/>
<components/>
<files/>
</RTE>
</Project> </Project>

97
projects/blezongkong/src/app_bat.c Normal file
View File

@ -0,0 +1,97 @@
#include "b6x.h"
#include "drvs.h"
#include "dbg.h"
#include "app_bat.h"
#include "sys_config.h"
#define BAT_Message_interval 1000
tmr_id_t BAT_Message_tmr_id;
BAT_Message_t BAT_Message;
uint16_t Bat_Voltage_Last;
uint16_t Voltage_lag_count;
uint8_t Bat_STA_Last;
// 门锁状态更新标志
bool GRB_Door_lock_updata=0;
// uint8_t bat_str[50]={0,0},bat_str_len=0;
static tmr_tk_t BAT_Message_Handle(tmr_id_t id) {
uint16_t Bat_Voltage = get_bat_voltage() * 10;
if(Bat_Voltage_Last >= Bat_Voltage){
if(Bat_Percent_Low > Bat_Voltage){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0xF3)|Bat_Low_STA;
WS2812_GRBs.GRBs=GRB_RED;
}else if(Bat_Percent_30 > Bat_Voltage){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0x03)|Bat_30_STA;
WS2812_GRBs.GRBs=GRB_RED;
}else if(Bat_Percent_60 > Bat_Voltage){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0x03)|Bat_60_STA;
WS2812_GRBs.GRBs=GRB_BLUE;
}else if(Bat_Percent_100 > Bat_Voltage){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0x03)|Bat_100_STA;
WS2812_GRBs.GRBs=GRB_GREEN;
}else{
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0xF3)|Bat_Full_STA;
WS2812_GRBs.GRBs=GRB_GREEN;
}
if(0==(BAT_Message.Bat_STA & Bat_Charge_STA)){
Bat_Voltage_Last =Bat_Voltage;
}else{
if(Bat_Voltage <= (Bat_Voltage_Last - 15)){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0xFC)|Bat_NotCharge_STA;
}
}
Voltage_lag_count=0;
}else {
Voltage_lag_count++;
if((3000/BAT_Message_interval) ==Voltage_lag_count){//3s
Voltage_lag_count=0;
uint16_t in_acc_percent= get_in_acc_percent();
// bat_str_len =sprintf((char *)bat_str, "ACC=%d%%\n", in_acc_percent);
// uart_send(UART1_PORT,bat_str_len,bat_str);
if(in_acc_percent <= 5){ // 油门小于2%时，才判断是否在充电
// uart_putc(UART1_PORT,'A');
if(Bat_Voltage >= (Bat_Voltage_Last + 15)){
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0xFC)|Bat_Charge_STA;
}
}else{
BAT_Message.Bat_STA =(BAT_Message.Bat_STA & 0xFC);
}
Bat_Voltage_Last =Bat_Voltage;
}
}
if((Bat_STA_Last != BAT_Message.Bat_STA) || GRB_Door_lock_updata != Get_Status(OUT_Door_lock)){
GRB_Door_lock_updata=Get_Status(OUT_Door_lock);
// bat_str_len =sprintf((char *)bat_str, "STA=%#X,Vol=%d\n", BAT_Message.Bat_STA ,Bat_Voltage);
// uart_send(UART1_PORT,bat_str_len,bat_str);
Bat_STA_Last =BAT_Message.Bat_STA;
if( Get_Status(OUT_Door_lock)){
if(BAT_Message.Bat_STA & Bat_Charge_STA){
Time_Event_On(GRB_WS2812_Event,NULL);
}else if(BAT_Message.Bat_STA & Bat_Low_STA){
Time_Event_Blink(GRB_WS2812_Event,150,150,0xffff,NULL);
}else{
Time_Event_Blink(GRB_WS2812_Event,500,500,0xffff,NULL);
}
}else{
Time_Event_Off(GRB_WS2812_Event,NULL);
}
}
BAT_Message.Bat_Voltage =Bat_Voltage;
return (BAT_Message_interval / 10);
}
void BAT_Message_Init(void) {
BAT_Message_tmr_id = sftmr_start(10, BAT_Message_Handle);
Bat_Voltage_Last =get_bat_voltage() * 10;
}

37
projects/blezongkong/src/app_bat.h Normal file
View File

@ -0,0 +1,37 @@
#ifndef _APP_BAT_H_
#define _APP_BAT_H_
// 充电状态
typedef enum {
Bat_NotCharge_STA=0x01,
Bat_Charge_STA=0x02,
Bat_Full_STA=0x04,
Bat_Low_STA=0x08,
Bat_30_STA=0x10,
Bat_60_STA=0x20,
Bat_100_STA=0x40,
} BAT_STA_t;
typedef enum {
Bat_Percent_Low =420,
Bat_Percent_30 =454,
Bat_Percent_60 =489,
Bat_Percent_100 =535,
} BAT_Percent_t;
// typedef enum {
// Bat_Percent_Low =240,
// Bat_Percent_30 =260,
// Bat_Percent_60 =300,
// Bat_Percent_100 =350,
// } BAT_Percent_t;
typedef struct BAT_Message{
uint8_t Bat_STA;
uint16_t Bat_Voltage; // 480=48.0V
} BAT_Message_t;
void BAT_Message_Init(void);
#endif

14
projects/blezongkong/src/app_ble_uart_proc.c
View File

@ -5,12 +5,11 @@
#include "app.h" #include "app.h"
#include "prf_sess.h" #include "prf_sess.h"
#include "app_uart.h" #include "app_uart.h"
#include "app_speed_governor.h"
#include "app_control_out.h" #include "app_control_out.h"
#include "app_ws2812.h" #include "app_ws2812.h"
extern BLE_GRB_Data_t BLE_WS2812_GRBs; extern BLE_GRB_Data_t BLE_WS2812_GRBs;
extern radar_daraframe_t radar_daraframe; // extern radar_daraframe_t radar_daraframe;
#define BLE_MAX_LEN (BLE_MTU - 3) #define BLE_MAX_LEN (BLE_MTU - 3)
#define NULL_CNT 20 #define NULL_CNT 20
@ -27,23 +26,22 @@ void sess_cb_rxd(uint8_t conidx, uint16_t len, const uint8_t *data)
uart_send(UART1_PORT, len, data); uart_send(UART1_PORT, len, data);
if(len == 9 && 0xa5 ==data[0] && 0x5a ==data[len-1]){ if(len == 9 && 0xa5 ==data[0] && 0x5a ==data[len-1]){
app_set_speed(*(int8_t *)(&data[2])); // app_set_speed(*(int8_t *)(&data[2]));
Set_Status(OUT_High_brake,(0x01 & (data[1] >> 0))); Set_Status(OUT_High_brake,(0x01 & (data[1] >> 0)));
Set_Status(OUT_Low_brake,(0x01 & (data[1] >> 1))); Set_Status(OUT_Low_brake,(0x01 & (data[1] >> 1)));
Set_Status(OUT_Push_key,(0x01 & (data[1] >> 2)));
Set_Status(OUT_High_speed,(0x01 & (data[1] >> 3)));
Set_Status(OUT_Low_speed,(0x01 & (data[1] >> 4))); Set_Status(OUT_Low_speed,(0x01 & (data[1] >> 4)));
Set_Status(OUT_Door_lock,(0x01 & (data[1] >> 5))); Set_Status(OUT_Door_lock,(0x01 & (data[1] >> 5)));
Set_Status(OUT_Switch_gear,(0x01 & (data[1] >> 6)));
BLE_WS2812_GRBs.len = data[3]; BLE_WS2812_GRBs.len = data[3];
BLE_WS2812_GRBs.GRBs = ((uint32_t)data[4]<<17)|((uint32_t)data[5]<<9)|((uint32_t)data[6]<<1); BLE_WS2812_GRBs.GRBs = ((uint32_t)data[4]<<17)|((uint32_t)data[5]<<9)|((uint32_t)data[6]<<1);
buff[0]=0xa5; buff[0]=0xa5;
buff[1]=data[1]; buff[1]=data[1];
buff[2]=(*(int8_t *)(&data[2]))<0?-data[2]:data[2]; buff[2]=(*(int8_t *)(&data[2]))<0?-data[2]:data[2];
buff[3]=radar_daraframe.Left_data+1; // buff[3]=radar_daraframe.Left_data+1;
buff[4]=radar_daraframe.Right_data+2; // buff[4]=radar_daraframe.Right_data+2;
buff[5]=buff[1]+buff[2]+buff[3]+buff[4]; buff[5]=buff[1]+buff[2]+buff[3]+buff[4];
buff[6]=0x5a; buff[6]=0x5a;
sess_txd_send(app_env.curidx, 7, buff); sess_txd_send(app_env.curidx, 7, buff);

113
projects/blezongkong/src/app_buzzer.c Normal file
View File

@ -0,0 +1,113 @@
#include "b6x.h"
#include "drvs.h"
#include "dbg.h"
#include "sys_config.h"
static Time_Events_t Time_Events[Time_Event_MAX];
tmr_tk_t Time_Event_tmr_id;
void Event_Handle(uint16_t Event_List ,bool isOn,void *Parameter){
// uart_putc(UART1_PORT,'E');
// uart_putc(UART1_PORT,'0'+Event_List);
// uart_putc(UART1_PORT,'0'+isOn);
// uart_putc(UART1_PORT,'\n');
(void)Parameter;
switch(Event_List){
case Buzzer_Event:
Set_Status(OUT_Buzzer,isOn);
break;
case GRB_WS2812_Event:
GRB_WS2812_Write_color(WS2812_GRBs.len, isOn ? WS2812_GRBs.GRBs : 0x0);
break;
default:
break;
}
}
static tmr_tk_t Time_Event_Handle(tmr_id_t id) {
for (uint16_t i = 0; i < Time_Event_MAX; i++) {
Time_Events_t *Events = &Time_Events[i];
if (Events->delay == 1) {
switch (Events->mode) {
case Time_MODE_OFF:
// 关闭
Events->isOn = false;
break;
case Time_MODE_ON:
// 打开
Events->isOn = true;
if(Events->Ms_delayoff){
Events->mode = Time_MODE_OFF;
Events->delay =1 + Events->Ms_delayoff;
Events->Ms_delayoff =0;
}
break;
case Time_MODE_BLINK:
// 闪烁
if (Events->blinkCount > 0) {
if (Events->isOn) {
Events->isOn = false;
if(0xffff != Events->blinkCount) {Events->blinkCount--;}
Events->delay =1 + Events->Ms_off / Time_delay_interval;
} else {
Events->isOn = true;
Events->delay =1 + Events->Ms_on / Time_delay_interval;
}
} else {
Events->mode = Time_MODE_OFF;
}
break;
}
Event_Handle(i, Events->isOn,Events->Parameter);
}
if(Events->delay >= 1){
Events->delay--;
}
}
return (Time_delay_interval / 10);
}
void Time_Event_Init(void) {
for (uint16_t i = 0; i < Time_Event_MAX; i++) {
Time_Events[i].mode = Time_MODE_OFF;
Time_Events[i].delay = 1;
Time_Events[i].Ms_on = 0;
Time_Events[i].Ms_off = 0;
Time_Events[i].blinkCount = 0;
Time_Events[i].isOn = false;
Time_Events[i].Parameter=NULL;
}
Time_Event_tmr_id = sftmr_start(10, Time_Event_Handle);
}
void Time_Event_DelayOff(uint16_t ledIndex ,uint16_t Ms_delayoff,void *Parameter) {
Time_Events[ledIndex].mode = Time_MODE_ON;
Time_Events[ledIndex].delay = 1;
Time_Events[ledIndex].Ms_delayoff =1 + Ms_delayoff;
Time_Events[ledIndex].Parameter=Parameter;
}
void Time_Event_On(uint16_t ledIndex,void *Parameter) {
Time_Events[ledIndex].mode = Time_MODE_ON;
Time_Events[ledIndex].delay = 1;
Time_Events[ledIndex].Parameter=Parameter;
}
void Time_Event_Off(uint16_t ledIndex,void *Parameter) {
Time_Events[ledIndex].mode = Time_MODE_OFF;
Time_Events[ledIndex].delay = 1;
Time_Events[ledIndex].Parameter=Parameter;
}
void Time_Event_Blink(uint16_t ledIndex, uint16_t Ms_on, uint16_t Ms_off, uint16_t blinkCount,void *Parameter) {
Time_Events[ledIndex].mode = Time_MODE_BLINK;
Time_Events[ledIndex].Ms_on = Ms_on;
Time_Events[ledIndex].Ms_off = Ms_off;
Time_Events[ledIndex].blinkCount = blinkCount;
Time_Events[ledIndex].delay =1 + Ms_on / Time_delay_interval;
Time_Events[ledIndex].Parameter=Parameter;
}

41
projects/blezongkong/src/app_buzzer.h Normal file
View File

@ -0,0 +1,41 @@
#ifndef _APP_BUZZER_H_
#define _APP_BUZZER_H_
#define Time_delay_interval 50
typedef enum {
Time_MODE_OFF,
Time_MODE_ON,
Time_MODE_BLINK
} Time_Event_Mode;
typedef struct {
Time_Event_Mode mode;
uint16_t delay;
uint16_t blinkCount;
uint16_t Ms_delayoff;
uint16_t Ms_on;
uint16_t Ms_off;
bool isOn;
void *Parameter;
} Time_Events_t;
typedef enum {
Buzzer_Event,
GRB_WS2812_Event,
Time_Event_MAX
} Time_Event_List;
void Time_Event_Init(void);
void Time_Event_DelayOff(uint16_t ledIndex ,uint16_t Ms_delayoff, void *Parameter);
void Time_Event_On(uint16_t ledIndex, void *Parameter);
void Time_Event_Off(uint16_t ledIndex, void *Parameter);
void Time_Event_Blink(uint16_t ledIndex, uint16_t Ms_on, uint16_t Ms_off, uint16_t blinkCount, void *Parameter);
#endif

278
projects/blezongkong/src/app_control_out.c
View File

@ -2,177 +2,146 @@
#include "drvs.h" #include "drvs.h"
#include "dbg.h" #include "dbg.h"
#include "sftmr.h" #include "sftmr.h"
#include "sys_config.h"
#include "app_uart.h"
#include "app_speed_governor.h"
#include "app_control_out.h" //管理员模式速度极限
uint8_t M_mode_sLim =M_DEFAULT_sLim;
//游客模式速度极限
uint8_t U_mode_sLim =U_DEFAULT_sLim;
// 使能电平 // 使能电平
bool app_control_en[PA_MAX]={ bool app_control_en[PA_MAX]={
[IN_GPS] =OE_LOW, // GPS超距 /L:超出活动区域(同) [IN_GPS] =OE_LOW, // GPS输入0 /边沿触发/L:低使能(反)
[IN_EXTI0_Custom0] =OE_LOW, // 管理员模式 [IN_Back] =OE_LOW, // 倒车 /边沿触发
[OUT_Door_lock] =OE_HIGH, // 开锁 /H:开锁(同) [IN_Brake] =OE_LOW, // 制动 /边沿触发
[OUT_Push_key] =OE_HIGH, // 开启推车 /L:开启推车(反) [IN_Manager_Mode] =OE_LOW, // 管理员模式 /边沿触发
[OUT_Switch_gear] =OE_LOW, // 限速/H:限速(反)
[OUT_High_speed] =OE_LOW, // 使能高速档位 /H:高使能(反) [OUT_Buzzer] =OE_HIGH, // 蜂鸣器 /H:高使能
[OUT_Low_speed] =OE_HIGH, // 使能低速档位 /L:低使能(反) [OUT_Low_speed] =OE_HIGH, // 使能低速档位 /L:低使能(反)
[OUT_Back_car] =OE_HIGH, // 使能倒车 /L:低使能倒车(反) [OUT_Back_car] =OE_HIGH, // 使能倒车 /L:低使能倒车(反)
[OUT_Low_brake] =OE_HIGH, // 使能低制动 /L:低使能(反) [OUT_Low_brake] =OE_HIGH, // 使能低制动 /L:低使能(反)
[OUT_High_brake] =OE_LOW // 使能高制动 /H:高使能(反) [OUT_High_brake] =OE_LOW, // 使能高制动 /H:高使能(反)
[OUT_Door_lock] =OE_HIGH, // 开锁 /H:开锁(同)
}; };
// 油门控制输入初始化/PA08/CH3
// 电池电压检测/充电检测/PA04/CH7
static void acc_in_bat_in_sadc_init(void)
{
// Analog Enable
GPIO_DIR_CLR(GPIO08 | GPIO04);
// ADC
iom_ctrl(PA04, IOM_ANALOG);//BAT//AIN3//电池电量
iom_ctrl(PA08, IOM_ANALOG);//ACC//AIN7//油门
// sadc init
#if SADC_VREF==VREF_VDD
sadc_init(SADC_ANA_VREF_VDD);//设置参考电压(3.3V)
#elif SADC_VREF==VREF_1V2
sadc_init(SADC_ANA_VREF_1V2);//设置参考电压(1.2V)
#elif SADC_VREF==VREF_2V4
sadc_init(SADC_ANA_VREF_2V4);//设置参考电压(2.4V)
#endif
}
// 获取油门输入信号原始ADC值
uint16_t get_in_acc_raw(void){
return (sadc_read(SADC_CH_AIN7, 0));
}
// 获取油门输入电压信号（unit:mV)
uint16_t get_in_acc_voltage(void){
return ((((SADC_VREF * sadc_read(SADC_CH_AIN7, 3))/1024)/ACC_DOWN_Res)*(ACC_UP_Res+ACC_DOWN_Res));
}
// 获取输入油门百分比（unit:%)(踏板信号)
uint16_t get_in_acc_percent(void){
uint16_t acc_voltage =get_in_acc_voltage();
if(900 > acc_voltage) {return 0;}
else if(3800 < acc_voltage){return 100;}
else{
return ((acc_voltage-900)/29);
// return (100*(acc_voltage - 900)/(3800-900));
}
}
// 获取电池电压值（unit:V)
float get_bat_voltage(void){
return (((((SADC_VREF / 1000.0) * sadc_read(SADC_CH_AIN3, 3))/1024.0)/BAT_DOWN_Res)*(BAT_UP_Res+BAT_DOWN_Res));
}
// 油门调节输出初始化/PWM4/PA05
static void acc_out_pwm_init(void){
iom_ctrl(PA05, IOM_SEL_TIMER);
// CTMR
pwm_init(PWM_CTMR, 15, 1023);//fo =16MHz /((15+1)*(1023+1))
pwm_chnl_cfg_t chnl_conf;
chnl_conf.duty = 0;
chnl_conf.ccer = PWM_CCER_SIPH;
chnl_conf.ccmr = PWM_CCMR_MODE1;
pwm_chnl_set(PWM_CTMR_CH4, &chnl_conf);
pwm_start(PWM_CTMR);
}
// 设置输出油门大小
void set_out_acc_percent(uint8_t percent){
pwm_duty_upd(PWM_CTMR_CH4 , ACC_PERCENT(percent));
}
//中控控制IO初始化 //中控控制IO初始化
void app_control_init(void){ void app_control_init(void){
// out // out
gpio_dir_output(OUT_Door_lock,OE_LOW);// 默认锁车 gpio_dir_output(OUT_Door_lock,OE_LOW);// 默认锁车
gpio_dir_output(OUT_Push_key,OE_LOW);// 默认关闭推车模式
gpio_dir_output(OUT_Switch_gear,OE_LOW);// 默认转把调速模式
gpio_dir_output(OUT_High_speed,OE_LOW);// 高速档位，默认失能
gpio_dir_output(OUT_Low_speed,OE_LOW);// 低速档位，默认失能 gpio_dir_output(OUT_Low_speed,OE_LOW);// 低速档位，默认失能
gpio_dir_output(OUT_Back_car,OE_LOW);// 默认前进模式 gpio_dir_output(OUT_Back_car,OE_LOW);// 默认前进模式
gpio_dir_output(OUT_Low_brake,OE_LOW);// 默认关低制动 gpio_dir_output(OUT_Low_brake,OE_LOW);// 默认关低制动
gpio_dir_output(OUT_High_brake,OE_HIGH);// 默认关高制动 gpio_dir_output(OUT_High_brake,OE_HIGH);// 默认关高制动
gpio_dir_output(OUT_Buzzer,OE_LOW);// 默认关蜂鸣器
//in //in
gpio_dir_input(OUT_Door_lock,IE_DOWN);// 默认锁车 gpio_dir_input(OUT_Door_lock,IE_DOWN);// 默认锁车
gpio_dir_input(OUT_Push_key,IE_DOWN);// 默认关闭推车模式
gpio_dir_input(OUT_Switch_gear,IE_DOWN);// 默认转把调速模式
gpio_dir_input(OUT_High_speed,IE_DOWN);// 高速档位，默认失能
gpio_dir_input(OUT_Low_speed,IE_DOWN);// 低速档位，默认失能 gpio_dir_input(OUT_Low_speed,IE_DOWN);// 低速档位，默认失能
gpio_dir_input(OUT_Back_car,IE_DOWN);// 默认前进模式 gpio_dir_input(OUT_Back_car,IE_DOWN);// 默认前进模式
gpio_dir_input(OUT_Low_brake,IE_DOWN);// 默认关低制动 gpio_dir_input(OUT_Low_brake,IE_DOWN);// 默认关低制动
gpio_dir_input(OUT_High_brake,IE_UP);// 默认关高制动 gpio_dir_input(OUT_High_brake,IE_UP);// 默认关高制动
gpio_dir_input(OUT_Buzzer,IE_DOWN);// 默认关蜂鸣器
//默认都失能 //默认都失能
Set_Status(OUT_Door_lock,0); Set_Status(OUT_Door_lock,0);
Set_Status(OUT_Push_key,0);
Set_Status(OUT_Switch_gear,0);
Set_Status(OUT_High_speed,0);
Set_Status(OUT_Low_speed,0); Set_Status(OUT_Low_speed,0);
Set_Status(OUT_Back_car,0); //失能倒车 Set_Status(OUT_Back_car,0); //失能倒车
Set_Status(OUT_Low_brake,0); Set_Status(OUT_Low_brake,0);
Set_Status(OUT_High_brake,0); Set_Status(OUT_High_brake,0);
Set_Status(OUT_Buzzer,0);
// app_set_Door_lock_status(0);// 默认锁车
// app_set_Push_status(0);// 默认关闭推车模式
// app_set_gears_status(0);// 默认转把调速模式
// app_set_brake_status(0);// 默认关制动
// app_set_Back_car_status(0);// 默认前进模式
// in // in
gpio_dir_input(IN_EXTI0_Custom0, IE_UP); // Input enable, pull-up gpio_dir_input(IN_GPS, IE_UP); // Input enable, pull-up
// gpio_dir_input(IN_EXTI1_Custom1, IE_UP); gpio_dir_input(IN_Back, IE_UP);
gpio_dir_input(IN_GPS, IE_UP); gpio_dir_input(IN_Brake, IE_UP);
gpio_dir_input(IN_Manager_Mode, IE_UP);
// EXTI config // // EXTI config
exti_init(EXTI_DBC(15, 4)); // exti_init(EXTI_DBC(15, 4));
exti_set(EXTI_FTS, EXTI_SRC(IN_EXTI0_Custom0) | EXTI_SRC(IN_GPS)); // falling // exti_set(EXTI_FTS, EXTI_SRC(IN_GPS) | EXTI_SRC(IN_Back) | EXTI_SRC(IN_Brake) | EXTI_SRC(IN_Manager_Mode)); // falling
exti_set(EXTI_DBE, EXTI_SRC(IN_EXTI0_Custom0) | EXTI_SRC(IN_GPS)); // exti_set(EXTI_DBE, EXTI_SRC(IN_GPS) | EXTI_SRC(IN_Back) | EXTI_SRC(IN_Brake) | EXTI_SRC(IN_Manager_Mode));
exti_set(EXTI_IER, EXTI_SRC(IN_EXTI0_Custom0) | EXTI_SRC(IN_GPS)); // exti_set(EXTI_IER, EXTI_SRC(IN_GPS) | EXTI_SRC(IN_Back) | EXTI_SRC(IN_Brake) | EXTI_SRC(IN_Manager_Mode));
// IRQ enable // IRQ enable
NVIC_EnableIRQ(EXTI_IRQn); // NVIC_EnableIRQ(EXTI_IRQn);
acc_in_bat_in_sadc_init();
acc_out_pwm_init();
__enable_irq(); __enable_irq();
} }
//获取档位状态/0：管理员模式速度无限制/1：游客模式油门限速/2：低速档/3：高速档
uint8_t app_get_gears_status(void){
uint8_t ret=0;
if(0 ==Get_Status(OUT_Switch_gear) && 1 ==Get_Status(OUT_High_speed) && 0 ==Get_Status(OUT_Low_speed)){
ret =0;
}else if(0 ==Get_Status(OUT_Switch_gear) && 0 ==Get_Status(OUT_High_speed) && 1 ==Get_Status(OUT_Low_speed)){
ret =1;
}else if(1 ==Get_Status(OUT_Switch_gear) && 0 ==Get_Status(OUT_High_speed) && 0 ==Get_Status(OUT_Low_speed)){
ret =2;
}else if(0 ==Get_Status(OUT_Switch_gear) && 0 ==Get_Status(OUT_High_speed) && 0 ==Get_Status(OUT_Low_speed)){
ret =3;
}
return ret;
}
//设置档位状态/0：管理员模式速度无限制/1：游客模式油门限速/2：低速档/3：高速档
uint8_t app_set_gears_status(uint8_t val){
if(0 ==val){ //管理员模式速度无限制
Set_Status(OUT_Switch_gear,0);
Set_Status(OUT_High_speed,1);
Set_Status(OUT_Low_speed,0);
}else if(1 ==val){//游客模式油门限速
Set_Status(OUT_Switch_gear,0);
Set_Status(OUT_High_speed,0);
Set_Status(OUT_Low_speed,1);
}else if(2 ==val){//低速模式
Set_Status(OUT_Switch_gear,1);
Set_Status(OUT_High_speed,0);
Set_Status(OUT_Low_speed,0);
}else if(3 ==val){//高速模式
Set_Status(OUT_Switch_gear,0);
Set_Status(OUT_High_speed,0);
Set_Status(OUT_Low_speed,0);
}
return app_get_gears_status();
}
//获取刹车状态/0：取消刹车/1：低刹/2：高刹
uint8_t app_get_brake_status(void){
uint8_t ret=0;
if(0 ==Get_Status(OUT_Low_brake) && 0 ==Get_Status(OUT_High_brake)){
ret =0;
}else if(1 ==Get_Status(OUT_Low_brake) && 0 ==Get_Status(OUT_High_brake)){
ret =1;
}else if(0 ==Get_Status(OUT_Low_brake) && 1 ==Get_Status(OUT_High_brake)){
ret =2;
}
return ret;
}
//设置刹车状态/0：取消刹车/1：低刹/2：高刹
uint8_t app_set_brake_status(uint8_t val){
if(1 ==val){//低刹
Set_Status(OUT_Low_brake,1);
Set_Status(OUT_High_brake,0);
}else if(2 ==val){//高刹
Set_Status(OUT_Low_brake,0);
Set_Status(OUT_High_brake,1);
}else{ //无刹
Set_Status(OUT_Low_brake,0);
Set_Status(OUT_High_brake,0);
}
return app_get_brake_status();
}
//获取电门锁状态设置/0：锁车状态/1：开锁状态
uint8_t app_get_Door_lock_status(void){
return Get_Status(OUT_Door_lock);
}
//电门锁状态设置/0：锁车/1：开锁
uint8_t app_set_Door_lock_status(bool val){
Set_Status(OUT_Door_lock,val);
return Get_Status(OUT_Door_lock);
}
//推车模式设置/0：退出推车状态/1：推车状态
uint8_t app_set_Push_status(bool val){
Set_Status(OUT_Push_key,val);
return Get_Status(OUT_Push_key);
}
//设置行驶方向/0：前进；1：倒车
uint8_t app_set_Back_car_status(bool val){
Set_Status(OUT_Back_car,val);
return Get_Status(OUT_Back_car);
}
// GPIO外部中端处理 // GPIO外部中端处理
void EXTI_IRQHandler(void) void EXTI_IRQHandler(void)
{ {
@ -181,24 +150,49 @@ void EXTI_IRQHandler(void)
if (irq_sta & EXTI_SRC(IN_GPS))// if (irq_sta & EXTI_SRC(IN_GPS))//
{ {
EXTI->ICR.Word = EXTI_SRC(IN_GPS); EXTI->ICR.Word = EXTI_SRC(IN_GPS);
if(1==Get_Status(IN_GPS)){
Set_Status(OUT_Door_lock,0);//GPS超出范围，直接锁车
}
} }
if (irq_sta & EXTI_SRC(IN_EXTI0_Custom0)) if (irq_sta & EXTI_SRC(IN_Back))
{ {
EXTI->ICR.Word = EXTI_SRC(IN_EXTI0_Custom0); EXTI->ICR.Word = EXTI_SRC(IN_Back);
if(1==Get_Status(IN_EXTI0_Custom0)){ //进入管理员模式
Set_Status(OUT_High_speed,1);//开启高速模式
}
} }
if (irq_sta & EXTI_SRC(IN_EXTI1_Custom1)) if (irq_sta & EXTI_SRC(IN_Brake))
{ {
EXTI->ICR.Word = EXTI_SRC(IN_EXTI1_Custom1); EXTI->ICR.Word = EXTI_SRC(IN_Brake);
}
if (irq_sta & EXTI_SRC(IN_Manager_Mode))
{
EXTI->ICR.Word = EXTI_SRC(IN_Manager_Mode);
} }
} }
// PAD控制进入管理员模式
bool PAD_Manager_Mode=0;
// PAD控制进入游客模式
bool PAD_User_Mode=0;
// 系统自动刹车
bool SYS_AUTO_brake=0;
// 系统自动减速
bool SYS_AUTO_Speed_Cut=0;
// 控制进程，定时调用
void Control_procedure(void){
//电门锁
Set_Status(OUT_Door_lock,(PAD_User_Mode || PAD_Manager_Mode || Get_Status(IN_GPS) || Get_Status(IN_Manager_Mode) ));
// 倒车
Set_Status(OUT_Back_car,Get_Status(IN_Back));
// 刹车
Set_Status(OUT_Low_brake,(Get_Status(IN_Brake) || SYS_AUTO_brake));
Set_Status(OUT_High_brake,(Get_Status(IN_Brake) || SYS_AUTO_brake));
//油门控制
set_out_acc_percent((SYS_AUTO_Speed_Cut?0.5:1)*get_in_acc_percent()*((PAD_Manager_Mode || Get_Status(IN_Manager_Mode)) ? sys_conf_info.M_mode_sLim : sys_conf_info.U_mode_sLim) / 100.0);
}

92
projects/blezongkong/src/app_control_out.h
View File

@ -1,77 +1,67 @@
#ifndef _APP_CONTROL_OUT_H_ #ifndef _APP_CONTROL_OUT_H_
#define _APP_CONTROL_OUT_H_ #define _APP_CONTROL_OUT_H_
#include "b6x.h"
#include "drvs.h" // ADC参考电压
#define VREF_1V2 1200
#define VREF_2V4 2400
#define VREF_VDD 3300
#define SADC_VREF VREF_2V4
// Dmin =(0.9V*(1024/3.3))/2 =139.6;
// Dmax =(3.8V*(1024/3.3))/2 =589.6;
#define ACC_Dmin 138
#define ACC_Dmax 591
#define ACC_PERCENT(s) (ACC_Dmin + ((ACC_Dmax - ACC_Dmin)*(s))/100)
// GPIO的输出需反向 // GPIO的输出需反向
enum app_control{ enum app_control{
IN_GPS =PA03, // GPS输入/0:被拉低就执行锁车 IN_GPS =PA09, // GPS输入0 /边沿触发
IN_EXTI0_Custom0 =PA08, // 自定义输入0 IN_Back =PA10, // 倒车 /边沿触发
IN_EXTI1_Custom1 =PA09, // 自定义输入1 /防盗检测/下降沿触发防盗 IN_Brake =PA11, // 制动 /边沿触发
OUT_Door_lock =PA18, // 电门锁 /H:开锁 IN_Manager_Mode =PA12, // 管理员模式 /边沿触发
OUT_Push_key =PA14, // 推车键 /L:开启推车
OUT_Switch_gear =PA13, // 调速模式选择/H:限速模式/L:不限速 OUT_Buzzer =PA13, // 蜂鸣器 /H:高使能
OUT_High_speed =PA11, // 高速档位 /L:低使能 OUT_Low_speed =PA14, // 低速档位 /L:低使能
OUT_Low_speed =PA12, // 低速档位 /L:低使能
OUT_Back_car =PA15, // 前进后退 /H:前进/L:后退 OUT_Back_car =PA15, // 前进后退 /H:前进/L:后退
OUT_Low_brake =PA16, // 低制动 /L:低使能 OUT_Low_brake =PA16, // 低制动 /L:低使能
OUT_High_brake =PA17 // 高制动 /H:低使能 OUT_High_brake =PA17, // 高制动 /H:低使能
OUT_Door_lock =PA18, // 电门锁 /H:开锁
}; };
//enum app_control{
// IN_GPS =PA08, // GPS输入/0:锁车
// IN_EXTI0_Custom0 =PA08, // 自定义输入0
// IN_EXTI1_Custom1 =PA09, // 自定义输入1 /防盗检测/下降沿触发防盗
// OUT_Door_lock =PA13, // 电门锁 /1:开锁
// OUT_Push_key =PA12, // 推车键 /1:开启推车
// OUT_Switch_gear =PA11, // 调速模式选择/1:限速模式/0:不限速
// OUT_High_speed =PA14, // 高速档位 /1:使能
// OUT_Low_speed =PA15, // 低速档位 /1:使能
// OUT_Back_car =PA16, // 前进后退 /0:前进/1:后退
// OUT_Low_brake =PA17, // 低制动 /1:使能
// OUT_High_brake =PA18 // 高制动 /1:使能
//};
extern bool app_control_en[PA_MAX]; extern bool app_control_en[PA_MAX];
// PAD控制进入管理员模式
extern bool PAD_Manager_Mode;
// PAD控制进入游客模式
extern bool PAD_User_Mode;
// 系统自动刹车
extern bool SYS_AUTO_brake;
// 系统自动减速
extern bool SYS_AUTO_Speed_Cut;
// 写1使能,写0失能 // 写1使能,写0失能
#define Set_Status(pad,activity) (gpio_put(pad, ((0 == activity) ? !app_control_en[pad] : app_control_en[pad]))) #define Set_Status(pad,activity) (gpio_put(pad, ((0 == activity) ? !app_control_en[pad] : app_control_en[pad])))
// 获取状态 1使能,0失能
#define Get_Status(pad) ((app_control_en[pad] == gpio_get(pad)) ? 1 : 0) #define Get_Status(pad) ((app_control_en[pad] == gpio_get(pad)) ? 1 : 0)
//中控控制IO初始化 //中控控制IO初始化
void app_control_init(void); void app_control_init(void);
// 设置控制状态 // 获取电池电压值（unit:V)
bool app_set_control_status(uint8_t pad, uint8_t val); float get_bat_voltage(void);
//获取档位状态/0：管理员模式速度无限制/1：游客模式油门限速/2：低速档/3：高速档 // 获取输入油门百分比（unit:%)(踏板信号)
uint8_t app_get_gears_status(void); uint16_t get_in_acc_percent(void);
// 设置输出油门百分比（unit:%)
//获取刹车状态/0：取消刹车/1：低刹/2：高刹 void set_out_acc_percent(uint8_t percent);
uint8_t app_get_brake_status(void);
//设置档位状态/0：管理员模式速度无限制/1：游客模式油门限速/2：低速档/3：高速档 // 控制进程，定时调用
uint8_t app_set_gears_status(uint8_t val); void Control_procedure(void);
//设置刹车状态/0：取消刹车/1：低刹/2：高刹
uint8_t app_set_brake_status(uint8_t val);
//获取电门锁状态
uint8_t app_get_Door_lock_status(void);
//电门锁状态设置/0：锁车状态/1：开锁状态
uint8_t app_set_Door_lock_status(bool val);
//推车模式设置/0：退出推车状态/1：推车状态
uint8_t app_set_Push_status(bool val);
//设置行驶方向/0：前进；1：倒车
uint8_t app_set_Back_car_status(bool val);
#endif #endif

160
projects/blezongkong/src/app_radar.c Normal file
View File

@ -0,0 +1,160 @@
#include "b6x.h"
#include "drvs.h"
#include "dbg.h"
#include "app_radar.h"
#include "sftmr.h"
#include "sys_config.h"
radar_daraframe_t radar_daraframe;
// 定时处理数和获取数据
tmr_id_t radar_timer_tmr_id;
bool radar_flag=0;
uint8_t radar_flag_cnt=0;
// uint8_t radar_str[50]={0,0},radar_str_len=0;
// 定时处理数和获取数据
static tmr_tk_t radar_timer_handler(tmr_id_t id){
(void)(id);
uint16_t Car_Distance=0;
if(Get_Status(OUT_Door_lock)){
// 定时发送状态信息
if(radar_flag_cnt > 4){
uint8_t ret_data[12]={0,0};
radar_flag_cnt =0;
ret_data[radar_flag_cnt++] =BAT_Message.Bat_STA; // 电池状态
ret_data[radar_flag_cnt++] =BAT_Message.Bat_Voltage >> 8; //电池电压
ret_data[radar_flag_cnt++] =BAT_Message.Bat_Voltage & 0xff;
ret_data[radar_flag_cnt++] =get_in_acc_percent();// 当前油门百分比
ret_data[radar_flag_cnt++] =(Get_Status(IN_GPS)<<0) | (Get_Status(IN_Back)<<1) | (Get_Status(OUT_Low_brake)<<2)
| (Get_Status(IN_Manager_Mode)<<3) | (Get_Status(PAD_Manager_Mode)<<4)
| (Get_Status(PAD_User_Mode)<<5);
app_uart_Sendcmd(UART1_PORT,0x10,0x01,ret_data,radar_flag_cnt);
radar_flag_cnt =0;
}else {
radar_flag_cnt++;
}
}
if(radar_flag == 1){
// radar_str_len =sprintf((char *)radar_str, "F=%d,B=%d\n", radar_daraframe.Front_data ,radar_daraframe.Back_data);
// uart_send(UART1_PORT,radar_str_len,radar_str);
radar_flag = 0;
}
if(Get_Status(OUT_Door_lock) && !(PAD_Manager_Mode || Get_Status(IN_Manager_Mode))){
if(Get_Status(IN_Back)){//如果是倒车状态
// uint8_t data[8]={0x02,0x03,0x01,0x00,0x00,0x01,0x85,0xC5};//读取处理值数据//520ms
uint8_t data[8]={0x02,0x03,0x01,0x01,0x00,0x01,0xD4,0x05};////读取实时值数据//120ms
Car_Distance =radar_daraframe.Back_data/100;
radar_daraframe.Back_data=0xffff;
uart_send(UART1_PORT,8,data);
}else{
// uint8_t data[8]={0x01,0x03,0x01,0x00,0x00,0x01,0x85,0xf6};//读取处理值数据//520ms
uint8_t data[8]={0x01,0x03,0x01,0x01,0x00,0x01,0xD4,0x36};//读取实时值数据//120ms
Car_Distance =radar_daraframe.Front_data/100;
radar_daraframe.Front_data=0xffff;
uart_send(UART1_PORT,8,data);
}
if(Car_Distance < (Get_Status(IN_Back)?sys_conf_info.AUTO_Brake_Distance_B :sys_conf_info.AUTO_Brake_Distance)){//小于自动刹车距离时
if(!SYS_AUTO_brake){
Time_Event_Blink(Buzzer_Event,100,100,0xffff,NULL);
}
SYS_AUTO_brake =1;//使能自动刹车
SYS_AUTO_Speed_Cut=1;
}else if(Car_Distance < (Get_Status(IN_Back)?sys_conf_info.AUTO_Speed_Cut_Distance_B :sys_conf_info.AUTO_Speed_Cut_Distance)){//小于自动减速距离时
if(SYS_AUTO_brake || !SYS_AUTO_Speed_Cut){
Time_Event_Blink(Buzzer_Event,200,500,0xffff,NULL);
}
SYS_AUTO_brake =0;
SYS_AUTO_Speed_Cut=1;
}else{
if(SYS_AUTO_brake || SYS_AUTO_Speed_Cut){
Time_Event_Off(Buzzer_Event,NULL);
}
SYS_AUTO_brake =0;
SYS_AUTO_Speed_Cut=0;
}
}else{
if(SYS_AUTO_brake || SYS_AUTO_Speed_Cut){
Time_Event_Off(Buzzer_Event,NULL);
}
SYS_AUTO_brake =0;
SYS_AUTO_Speed_Cut=0;
}
return _MS(300);//300ms
}
// 雷达测离初始化
void app_radar_init(void){
// sftmr_init(); //main函数中已初始化
radar_timer_tmr_id = sftmr_start(10, radar_timer_handler);
}
uint8_t radar_buff[10],radar_state;
uint16_t i;
// 串口数据接收
void app_radar_Receive(uint8_t data){
switch(radar_state){
case 0://dev_addr
if (data == 0x01 || data == 0x02) {
radar_buff[0]=data;
radar_state = 1;
}
break;
case 1://cmd_id
if (data == 0x03) {
radar_buff[1]=data;
radar_state = 2;
}else {
radar_state = 0;
radar_buff[0]=0;
}
break;
case 2://length
if (data == 0x02) {
radar_buff[2]=data;
radar_state = 3;
i=0;
}else {
radar_state = 0;
radar_buff[0]=0;
}
break;
case 3://data
radar_buff[3+i] =data;
i++;
if(i==2){
i=0;
radar_state = 4;
}
break;
case 4://crc16
radar_buff[5+i] =data;
i++;
if(i==2){
uint16_t crc16 =crc16_checkout(radar_buff,5);
if(crc16 == (((uint16_t)radar_buff[6] << 8 ) | radar_buff[5])){
if(0x01 == radar_buff[0]){
radar_daraframe.Front_data = ((uint16_t)radar_buff[3] << 8 ) | radar_buff[4];
}else if(0x02 == radar_buff[0]){
radar_daraframe.Back_data = ((uint16_t)radar_buff[3] << 8 ) | radar_buff[4];
}
radar_flag = 1;
}
i=0;
radar_state = 0;
radar_buff[0]=0;
}
break;
}
}

23
projects/blezongkong/src/app_radar.h Normal file
View File

@ -0,0 +1,23 @@
#ifndef _RADAR_H_
#define _RADAR_H_
#include "sftmr.h"
#define BUFF_MAX 10
typedef struct radar_daraframe{
volatile uint16_t Front_data;
volatile uint16_t Back_data;
} radar_daraframe_t;
extern radar_daraframe_t radar_daraframe;
extern uint8_t radar_buff[];
extern uint8_t Rec_lenght;
// 雷达测离初始化
void app_radar_init(void);
// 串口数据接收
void app_radar_Receive(uint8_t data);
#endif

88
projects/blezongkong/src/app_speed_governor.c
View File

@ -1,88 +0,0 @@
#include "b6x.h"
#include "drvs.h"
#include "dbg.h"
#include "app_speed_governor.h"
#include "sftmr.h"
#include "app_control_out.h"
#include "app_uart.h"
#define speed_timeout 500
#define radar_timeout 500
extern radar_daraframe_t radar_daraframe;
tmr_id_t speed_tmr_id; // softTimer ID
tmr_id_t radar_tmr_id;
static tmr_tk_t speed_timer_handler(tmr_id_t id);
static tmr_tk_t radar_timer_handler(tmr_id_t id);
//转把速度调节初始化/PWM4/PA05
void app_speed_governing_init(int8_t c8_speed){
if(c8_speed >= 0){
app_set_Back_car_status(0);//前进
}else{
app_set_Back_car_status(1);//后退
c8_speed = -c8_speed;
}
iom_ctrl(PA05, IOM_SEL_TIMER);
// CTMR
pwm_init(PWM_CTMR, 15, 999);//fo =16MHz /((15+1)*(999+1))
pwm_chnl_cfg_t chnl_conf;
chnl_conf.duty = SPEED(c8_speed);
chnl_conf.ccer = PWM_CCER_SIPH;
chnl_conf.ccmr = PWM_CCMR_MODE1;
pwm_chnl_set(PWM_CTMR_CH4, &chnl_conf);
pwm_start(PWM_CTMR);
sftmr_init();
speed_tmr_id = sftmr_start(10, speed_timer_handler);
radar_tmr_id = sftmr_start(10, radar_timer_handler);
}
static tmr_tk_t speed_timer_handler(tmr_id_t id){
(void)(id);
// app_set_Back_car_status(0);//前进
pwm_duty_upd(PWM_CTMR_CH4 , 0);//速度清零
uart_putc(UART1_PORT,'S');
return 0;//单次
}
static tmr_tk_t radar_timer_handler(tmr_id_t id){
(void)(id);
radar_daraframe.Left_data =0;
radar_daraframe.Right_data =0;
uart_putc(UART1_PORT,'R');
return 0;//单次
}
//设置速度 0~100
void app_set_speed(int8_t c8_speed){
if(c8_speed >= 0){
app_set_Back_car_status(0);//前进
}else{
app_set_Back_car_status(1);//后退
c8_speed = -c8_speed;
}
sftmr_Refresh(speed_tmr_id,_MS(speed_timeout));
pwm_duty_upd(PWM_CTMR_CH4 , SPEED(c8_speed));
}
//刷新雷达数据
void app_updata_radar(void){
sftmr_Refresh(radar_tmr_id,_MS(radar_timeout));
}

20
projects/blezongkong/src/app_speed_governor.h
View File

@ -1,20 +0,0 @@
#ifndef _SPEED_GOVERNOR_H_
#define _SPEED_GOVERNOR_H_
#include "sftmr.h"
#define PWM_MIN 136
#define PWM_MAX 580
#define SPEED(s) (PWM_MIN + ((PWM_MAX-PWM_MIN)*(s))/100)
//转把速度调节初始化/PWM4/PA05
void app_speed_governing_init(int8_t c8_speed);
//设置速度
void app_set_speed(int8_t c8_speed);
//刷新雷达数据
void app_updata_radar(void);
#endif

156
projects/blezongkong/src/app_uart.c
View File

@ -2,10 +2,7 @@
#include "drvs.h" #include "drvs.h"
#include "dbg.h" #include "dbg.h"
#include "rbuf.h" #include "rbuf.h"
#include "app_uart.h" #include "sys_config.h"
#include "app_speed_governor.h"
#include "app_control_out.h"
#include "app_ws2812.h"
void app_uart_Init(uint8_t port, uint32_t baudrate, uint8_t io_tx, uint8_t io_rx) void app_uart_Init(uint8_t port, uint32_t baudrate, uint8_t io_tx, uint8_t io_rx)
{ {
@ -36,88 +33,68 @@ uint8_t crc8_checkout(uint8_t *buff, uint8_t length)
return crc; return crc;
} }
radar_daraframe_t radar_daraframe; // CRC-16/MODBUS polynomial: x^16 + x^15 + x^2 + 1 (0x8005)
uint16_t crc16_checkout(uint8_t *buff, uint16_t length) {
uint8_t i;
uint16_t crc = 0xffff; // Initial value
while (length--)
{
crc ^= *buff++;
for (i = 0; i < 8; ++i)
{
if (crc & 1)
crc = (crc >> 1) ^ 0xA001; // 0xA001 = reverse 0x8005
else
crc = (crc >> 1);
}
}
return crc;
}
uart_daraframe_t uart1_daraframe; uart_daraframe_t uart1_daraframe;
volatile uint8_t uart1_state =0; volatile uint8_t uart1_state =0;
volatile uint8_t uart1_data_cnt =0; volatile uint8_t uart1_data_cnt =0;
extern GRB_Data_t WS2812_GRBs;
bool uart2_Back_car=0; bool uart2_Back_car=0;
static void app_uart1_hande(void){ static void app_uart1_hande(void){
uint8_t ret_data[MAX_LEN]={0,0}; uint8_t ret_data[MAX_LEN]={0,0};
uint8_t length; uint8_t length=0;
switch(uart1_daraframe.cmd_id){ switch(uart1_daraframe.cmd_id){
case 0x01://电门锁 case 0x01: // 配置系统参数
if(1 ==uart1_daraframe.length){//电门锁状态设置/0：锁车状态/1：开锁状态 sys_conf_info.M_mode_sLim= uart1_daraframe.data[0];
ret_data[0] =app_set_Door_lock_status(uart1_daraframe.data[0]); sys_conf_info.U_mode_sLim= uart1_daraframe.data[1];
length = 1; sys_conf_info.AUTO_Brake_Distance= uart1_daraframe.data[2];
app_uart_Sendcmd(UART1_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, ret_data, length); sys_conf_info.AUTO_Speed_Cut_Distance= uart1_daraframe.data[3];
} sys_conf_info.AUTO_Brake_Distance_B= uart1_daraframe.data[4];
sys_conf_info.AUTO_Speed_Cut_Distance_B= uart1_daraframe.data[5];
write_cfg(&sys_conf_info);
case 0x02: // 读取系统配置
ret_data[length++]=sys_conf_info.M_mode_sLim;
ret_data[length++]=sys_conf_info.U_mode_sLim;
ret_data[length++]=sys_conf_info.AUTO_Brake_Distance;
ret_data[length++]=sys_conf_info.AUTO_Speed_Cut_Distance;
ret_data[length++]=sys_conf_info.AUTO_Brake_Distance_B;
ret_data[length++]=sys_conf_info.AUTO_Speed_Cut_Distance_B;
app_uart_Sendcmd(UART1_PORT,uart1_daraframe.cmd_id,0x01,ret_data,length);
break; break;
case 0x02://油门控制 case 0x03: //0 命令控制进入管理员模式//1 命令控制进入游客模式
if(3 ==uart1_daraframe.length){ PAD_Manager_Mode =uart1_daraframe.data[0];
if(1==Get_Status(IN_GPS)){ PAD_User_Mode =uart1_daraframe.data[1];
Set_Status(OUT_Door_lock,0);//GPS超出范围，直接锁车 if(1==PAD_User_Mode && 1==PAD_Manager_Mode){
} PAD_User_Mode=0;
if(app_get_Door_lock_status()){//开锁时 PAD_Manager_Mode=1;
if(0 > *(int8_t *)(&uart1_daraframe.data[0])){//倒车
if(1 == uart2_Back_car){
// NVIC_EnableIRQ(UART2_IRQn);
// app_uart_Init(UART2_PORT,9600,PA10,PA04);//倒车雷达
}
uart2_Back_car =0;
}else {//前进
if(0 == uart2_Back_car){
// NVIC_DisableIRQ(UART2_IRQn);
// app_uart_Init(UART2_PORT,9600,PA10,PA09);//磁刹控制器
}
uart2_Back_car =1;
}
app_set_speed(*(int8_t *)(&uart1_daraframe.data[0]));
ret_data[0] = uart1_daraframe.data[0];//当前油门状态 倒车：-100~0 / 前进：0~100
ret_data[1] = app_set_brake_status(uart1_daraframe.data[1]);//当前刹车状态
if(1==Get_Status(IN_EXTI0_Custom0)){
ret_data[2] = app_set_gears_status(0);//进入管理员模式
}else {
ret_data[2] = app_set_gears_status(uart1_daraframe.data[2]);//当前速度档位
}
ret_data[3] = radar_daraframe.Left_data;
ret_data[4] = radar_daraframe.Right_data;
length = 5;
app_uart_Sendcmd(UART1_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, ret_data, length);
}else{
ret_data[0] = app_get_Door_lock_status();
length = 1;
app_uart_Sendcmd(UART1_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, ret_data, length);
}
} }
app_uart_Sendcmd(UART1_PORT,uart1_daraframe.cmd_id,0x01,uart1_daraframe.data,uart1_daraframe.length);
break; break;
case 0x03://推车模式 case 0x04:
if(1 ==uart1_daraframe.length){//推车模式设置/0：退出推车状态/1：推车状态
ret_data[0] =app_set_Push_status(uart1_daraframe.data[0]);
length = 1;
app_uart_Sendcmd(UART1_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, ret_data, length);
}
break;
case 0x04://GRB
WS2812_GRBs.len =uart1_daraframe.length;
for(length=0;length < WS2812_GRBs.len;length++){//G3,R3,B2
WS2812_GRBs.GRBs[length] = ((uint32_t)(uart1_daraframe.data[length] & 0xE0)<<16) | ((uint32_t)(uart1_daraframe.data[length] & 0x1C)<<11) | ((uint32_t)(uart1_daraframe.data[length] & 0x03)<<6);
}
// WS2812_GRBs.len =uart1_daraframe.length / 3; app_uart_Sendcmd(UART1_PORT,uart1_daraframe.cmd_id,0x01,uart1_daraframe.data,uart1_daraframe.length);
// for(length=0;length < WS2812_GRBs.len;length++){
// WS2812_GRBs.GRBs[length] = ((uint32_t)uart1_daraframe.data[3*length + 0]<<16) | ((uint32_t)uart1_daraframe.data[3*length +1]<<8) | ((uint32_t)uart1_daraframe.data[3*length +2]);
// }
// app_uart_Sendcmd(UART2_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, uart1_daraframe.data, length);
// app_uart_Sendcmd(UART1_PORT, uart1_daraframe.cmd_id, uart1_daraframe.reg_addr, uart1_daraframe.data, length);
break; break;
default : default :
@ -211,8 +188,9 @@ void UART1_IRQHandler(void)
if (state & 0x01) //(BIT_RXRD) if (state & 0x01) //(BIT_RXRD)
{ {
UART1->IDR.RXRD = 1; // Disable RXRD Interrupt UART1->IDR.RXRD = 1; // Disable RXRD Interrupt
uint8_t data = UART1->RBR;
uart1_Receive(UART1->RBR); app_radar_Receive(data);
uart1_Receive(data);
UART1->ICR.RXRD = 1; // Clear RXRD Interrupt Flag UART1->ICR.RXRD = 1; // Clear RXRD Interrupt Flag
UART1->IER.RXRD = 1; // Enable RXRD Interrupt UART1->IER.RXRD = 1; // Enable RXRD Interrupt
} }
@ -223,39 +201,9 @@ void UART1_IRQHandler(void)
***************************************UART2***************************************************** ***************************************UART2*****************************************************
*/ */
uint8_t uart2_state =0;
static void uart2_Receive(uint8_t data) static void uart2_Receive(uint8_t data)
{ {
switch(uart2_state){
case 0://header
if (data == 0x0C || data == 0x0D) {
radar_daraframe.header = data;
uart2_state = 1;//to data
//debug("header");
}
break;
case 1://data
//debug("data:%x", data);
if(0x0c == radar_daraframe.header){
radar_daraframe.Left_data = data;
}else if(0x0d == radar_daraframe.header){
radar_daraframe.Right_data = data;
}
uart2_state = 2;
break;
}
// uart_putc(UART2_PORT,data);
// uart_putc(UART2_PORT,'0'+uart2_state);
if(uart2_state == 2){
radar_daraframe.header = 0;
app_updata_radar();
uart2_state = 0;
/*
rx handler codes....
*/
}
} }
void UART2_IRQHandler(void) void UART2_IRQHandler(void)
@ -270,8 +218,8 @@ void UART2_IRQHandler(void)
UART2->ICR.RXRD = 1; // Clear RXRD Interrupt Flag UART2->ICR.RXRD = 1; // Clear RXRD Interrupt Flag
UART2->IER.RXRD = 1; // Enable RXRD Interrupt UART2->IER.RXRD = 1; // Enable RXRD Interrupt
} }
} }
//发送命令 //发送命令
void app_uart_Sendcmd(uint8_t port, volatile uint8_t cmd_id ,volatile uint8_t reg_addr ,volatile uint8_t *data, volatile uint8_t length) void app_uart_Sendcmd(uint8_t port, volatile uint8_t cmd_id ,volatile uint8_t reg_addr ,volatile uint8_t *data, volatile uint8_t length)
{ {

13
projects/blezongkong/src/app_uart.h
View File

@ -7,9 +7,9 @@
//数据帧头 //数据帧头
#define FRAME_HEADER 0xA100 #define FRAME_HEADER 0xA100
#define MAX_LEN 127 #define MAX_LEN 32
//失能数据校验 //0:失能数据校验
#define DISABLE_CRC8 1 #define DISABLE_CRC8 1
typedef struct uart_daraframe typedef struct uart_daraframe
@ -22,12 +22,7 @@ typedef struct uart_daraframe
volatile uint8_t crc; volatile uint8_t crc;
} uart_daraframe_t; } uart_daraframe_t;
typedef struct radar_daraframe
{
uint8_t header;
uint8_t Left_data;
uint8_t Right_data;
} radar_daraframe_t;
//初始化 //初始化
@ -36,5 +31,7 @@ void app_uart_Init(uint8_t port, uint32_t baudrate, uint8_t io_tx, uint8_t io_rx
void app_uart_Sendcmd(uint8_t port, volatile uint8_t cmd_id ,volatile uint8_t reg_addr ,volatile uint8_t *data, volatile uint8_t length); void app_uart_Sendcmd(uint8_t port, volatile uint8_t cmd_id ,volatile uint8_t reg_addr ,volatile uint8_t *data, volatile uint8_t length);
uint8_t crc8_checkout(uint8_t *buff, uint8_t length); uint8_t crc8_checkout(uint8_t *buff, uint8_t length);
// CRC-16/MODBUS polynomial: x^16 + x^15 + x^2 + 1 (0x8005)
uint16_t crc16_checkout(uint8_t *buff, uint16_t length);
#endif #endif

17
projects/blezongkong/src/app_ws2812.c
View File

@ -11,11 +11,18 @@ uint32_t ___WS2812_DIN___ =1<< OUT_GRB_WS2812_DIN;
#define WS2812_DIN_H GPIO_DAT_SET(___WS2812_DIN___) #define WS2812_DIN_H GPIO_DAT_SET(___WS2812_DIN___)
#define WS2812_DIN_L GPIO_DAT_CLR(___WS2812_DIN___) #define WS2812_DIN_L GPIO_DAT_CLR(___WS2812_DIN___)
BLE_GRB_Data_t WS2812_GRBs={
.len=73,
.GRBs=0x00,
};
void GRB_WS2812_Init(void) void GRB_WS2812_Init(void)
{ {
gpio_dir_output(OUT_GRB_WS2812_DIN,OE_HIGH); // gpio_dir_output(OUT_GRB_WS2812_DIN,OE_HIGH);
gpio_dir_input(OUT_GRB_WS2812_DIN,IE_UP); // gpio_dir_input(OUT_GRB_WS2812_DIN,IE_UP);
gpio_put_hi(OUT_GRB_WS2812_DIN); // gpio_put_hi(OUT_GRB_WS2812_DIN);
GPIO_DIR_SET(___WS2812_DIN___);
WS2812_DIN_L;
} }
void GRB_WS2812_Reset(void) void GRB_WS2812_Reset(void)
@ -25,6 +32,7 @@ void GRB_WS2812_Init(void)
WS2812_DIN_L; WS2812_DIN_L;
} }
__attribute__((section("ram_func.fshc.")))
void GRB_WS2812_Write_24Bits(uint32_t GRB888) void GRB_WS2812_Write_24Bits(uint32_t GRB888)
{ {
uint32_t i; uint32_t i;
@ -46,9 +54,8 @@ void GRB_WS2812_Write_24Bits(uint32_t GRB888)
void GRB_WS2812_Write_GRBs(uint8_t len, uint32_t *GRB888) void GRB_WS2812_Write_GRBs(uint8_t len, uint32_t *GRB888)
{ {
while(len--)GRB_WS2812_Write_24Bits(*GRB888++);
GRB_WS2812_Reset(); GRB_WS2812_Reset();
while(len--)GRB_WS2812_Write_24Bits(*GRB888++);
} }
void GRB_WS2812_Write_color(uint8_t len, uint32_t GRB888) void GRB_WS2812_Write_color(uint8_t len, uint32_t GRB888)

10
projects/blezongkong/src/app_ws2812.h
View File

@ -6,7 +6,6 @@
typedef struct GRB_Data{ typedef struct GRB_Data{
uint8_t len; uint8_t len;
uint32_t GRBs[127]; uint32_t GRBs[127];
} GRB_Data_t; } GRB_Data_t;
@ -15,14 +14,21 @@ typedef struct BLE_GRB_Data{
uint32_t GRBs; uint32_t GRBs;
} BLE_GRB_Data_t; } BLE_GRB_Data_t;
#define GRB_RED 0x00ff00;
#define GRB_GREEN 0xff0000;
#define GRB_BLUE 0x0000ff;
extern BLE_GRB_Data_t WS2812_GRBs;
void GRB_WS2812_Init(void); void GRB_WS2812_Init(void);
void GRB_WS2812_Write_24Bits(uint32_t GRB888); void GRB_WS2812_Write_24Bits(uint32_t GRB888);
void GRB_WS2812_Reset(void); void GRB_WS2812_Reset(void);
void GRB_WS2812_Write_color(uint8_t len, uint32_t GRB888);
void GRB_WS2812_Write_GRBs(uint8_t len, uint32_t *GRB888); void GRB_WS2812_Write_GRBs(uint8_t len, uint32_t *GRB888);
void GRB_WS2812_Write_color(uint8_t len, uint32_t GRB888);
#endif #endif

156
projects/blezongkong/src/main.c
View File

@ -1,28 +1,52 @@
#include "b6x.h" #include "b6x.h"
#include "regs.h"
#include "drvs.h" #include "drvs.h"
#include "dbg.h" #include "dbg.h"
#include "app_uart.h"
#include "sftmr.h"
#include "app_speed_governor.h"
#include "app_control_out.h"
#include "app_ws2812.h"
#include "bledef.h" #include "bledef.h"
#include "app.h" #include "app.h"
#include "sftmr.h"
#include "sys_config.h"
#define FLASH_INFO_CODE_ADDR (FLASH_BASE + 0x08)
#define OTA_BANK_A_BASE (0x18004000)
#define OTA_BANK_B_BASE (0x18020000)
#define OTA_BANK_A (OTA_BANK_A_BASE - FLASH_BASE)
#define OTA_BANK_B (OTA_BANK_B_BASE - FLASH_BASE)
GRB_Data_t WS2812_GRBs;
BLE_GRB_Data_t BLE_WS2812_GRBs; BLE_GRB_Data_t BLE_WS2812_GRBs;
extern void app_ble_procedure(void); extern void app_ble_procedure(void);
//************************************************
#define IWDT_WINDOW (32768) //32.768KHz 1S
//看门狗配置
void IWDT_IRQHandler(void)
{
iwdt_feed();//喂狗
}
static void iwdtInit(void)
{
iwdt_init(IWDT_INTEN_BIT | IWDT_CR_DFLT);
iwdt_conf(IWDT_WINDOW);
NVIC_EnableIRQ(IWDT_IRQn);
__enable_irq();
}
static void sysInit(void) static void sysInit(void)
{ {
// Todo config, if need // Todo config, if need
iwdt_disable(); iwdt_disable();
// rcc_ble_en(); // rcc_ble_en();
// rcc_adc_en(); rcc_adc_en();
rcc_fshclk_set(FSH_CLK_DPSC42); rcc_fshclk_set(FSH_CLK_DPSC42);
APBMISC->XOSC16M_CTRL.XOSC16M_CAP_TR = 0x22; APBMISC->XOSC16M_CTRL.XOSC16M_CAP_TR = 0x22;
@ -38,49 +62,136 @@ static void devInit(void)
// Init BLE App // Init BLE App
// app_init(rsn); // app_init(rsn);
sftmr_init();
iwdtInit();
// rf_pa_set(0x0C); // rf_pa_set(0x0C);
} }
uint8_t str[30]={0,0},str_len=0;
static tmr_tk_t test_timer_handler(tmr_id_t id){ // static tmr_tk_t test_timer_handler(tmr_id_t id){
(void)(id); // (void)(id);
// // uint16_t adc_data;
GRB_WS2812_Write_GRBs(WS2812_GRBs.len ,WS2812_GRBs.GRBs); // // adc_data = sadc_read(SADC_CH_AIN3, 0);
// GRB_WS2812_Write_color(BLE_WS2812_GRBs.len,BLE_WS2812_GRBs.GRBs); // // str_len =sprintf((char *)str, "\nBAT0 = %.2f V /%d\n", get_bat_voltage(),adc_data);
return 10; // // uart_send(UART1_PORT,str_len,str);
// // adc_data = sadc_read(SADC_CH_AIN7, 0);
// // str_len =sprintf((char *)str, "ACC = %d %% /%d\n", get_in_acc_percent(),adc_data);
// // uart_send(UART1_PORT,str_len,str);
// // GRB_WS2812_Write_GRBs(WS2812_GRBs.len ,WS2812_GRBs.GRBs);
// // GRB_WS2812_Write_color(BLE_WS2812_GRBs.len,BLE_WS2812_GRBs.GRBs);
// return 3;
// }
uint32_t bank;
SYS_CONF_t sys_conf_info;
__attribute__((section("ram_func.fshc.")))
static void flash_sector_erase(uint32_t offset)
{
GLOBAL_INT_DISABLE();
while (SYSCFG->ACC_CCR_BUSY);
fshc_erase(offset, FSH_CMD_ER_SECTOR);
GLOBAL_INT_RESTORE();
} }
void write_cfg(SYS_CONF_t *sys_config_info_t){
flash_sector_erase(bank);
flash_write(bank, (uint32_t *)sys_config_info_t,sizeof(SYS_CONF_t)/sizeof(uint32_t));
}
int main(void) int main(void)
{ {
sysInit(); sysInit();
devInit(); devInit();
// Global Interrupt Enable // Global Interrupt Enable
GLOBAL_INT_START(); GLOBAL_INT_START();
uint32_t curr_code_addr = RD_32(FLASH_INFO_CODE_ADDR);
if(curr_code_addr == OTA_BANK_A_BASE)
{
bank = OTA_BANK_B;
}
else if(curr_code_addr == OTA_BANK_B_BASE)
{
bank = OTA_BANK_A;
}
// read config
// read flash
flash_read(bank, (uint32_t *)(&sys_conf_info),sizeof(sys_conf_info)/sizeof(uint32_t));
if(0xAA !=sys_conf_info.HEAD){
sys_conf_info.HEAD=0xAA;
sys_conf_info.M_mode_sLim = M_DEFAULT_sLim,//read flash
sys_conf_info.U_mode_sLim = U_DEFAULT_sLim,//read flash
sys_conf_info.AUTO_Brake_Distance =DEF_AUTO_Brake_Distance,//自动刹车距离
sys_conf_info.AUTO_Speed_Cut_Distance =DEF_AUTO_Speed_Cut_Distance,//自动减速距离
sys_conf_info.AUTO_Brake_Distance_B =DEF_AUTO_Brake_Distance,//自动刹车距离
sys_conf_info.AUTO_Speed_Cut_Distance_B =DEF_AUTO_Speed_Cut_Distance,//自动减速距离
write_cfg(&sys_conf_info);
}
app_control_init(); app_control_init();
app_speed_governing_init(0);
app_uart_Init(UART1_PORT,115200,PA06,PA07);//上位机
app_uart_Init(UART2_PORT,9600,20,PA04);//倒车雷达
// app_uart_Init(UART1_PORT,115200,PA03,PA04);//上位机 app_uart_Init(UART1_PORT,9600,PA06,PA07);//上位机//倒车雷达
// app_uart_Init(UART2_PORT,9600,PA06,PA07);//倒车雷达 // app_uart_Init(UART2_PORT,9600,20,PA03);
app_radar_init();
Time_Event_Init();
uint8_t str[50]={0,0},str_len=0;
str_len =sprintf((char *)str, "HEAD=%#X,M_s=%d,U_s=%d\n Brake=%d,Speed_Cut=%d\n Brake_B=%d,Speed_Cut_B=%d\n",
sys_conf_info.HEAD,
sys_conf_info.M_mode_sLim,
sys_conf_info.U_mode_sLim,
sys_conf_info.AUTO_Brake_Distance,
sys_conf_info.AUTO_Speed_Cut_Distance,
sys_conf_info.AUTO_Brake_Distance_B,
sys_conf_info.AUTO_Speed_Cut_Distance_B);
uart_send(UART1_PORT,str_len,str);
bootDelayMs(1000);
GRB_WS2812_Init(); GRB_WS2812_Init();
sftmr_start(20, test_timer_handler);
// GRB_WS2812_Write_color(WS2812_GRBs.len,0xff);
// bootDelayMs(1000);
// GRB_WS2812_Write_color(WS2812_GRBs.len,0x00);
// bootDelayMs(1000);
// GRB_WS2812_Write_color(WS2812_GRBs.len,0xff00);
// bootDelayMs(1000);
// GRB_WS2812_Write_color(WS2812_GRBs.len,0x00);
// bootDelayMs(1000);
// GRB_WS2812_Write_color(WS2812_GRBs.len,0xff0000);
// bootDelayMs(1000);
BAT_Message_Init();
// ADC初始化
// sftmr_start(20, test_timer_handler);
while(1){ while(1){
// SoftTimer Polling // SoftTimer Polling
sftmr_schedule(); sftmr_schedule();
// Schedule Messages & Events // Schedule Messages & Events
// ble_schedule(); // ble_schedule();
// User's Procedure // User's Procedure
// app_ble_procedure(); // app_ble_procedure();
Control_procedure();
} }
} }
@ -100,4 +211,3 @@ int main(void)

54
projects/blezongkong/src/sys_config.h Normal file
View File

@ -0,0 +1,54 @@
#ifndef _SYS_CONFIG_H_
#define _SYS_CONFIG_H_
#include "app_control_out.h"
#include "app_uart.h"
#include "stdio.h"
#include "app_radar.h"
#include "app_ws2812.h"
#include "app_buzzer.h"
#include "app_bat.h"
typedef struct SYS_CONF{
uint32_t HEAD;
uint32_t M_mode_sLim;
uint32_t U_mode_sLim;
uint32_t AUTO_Brake_Distance;
uint32_t AUTO_Speed_Cut_Distance;
uint32_t AUTO_Brake_Distance_B;
uint32_t AUTO_Speed_Cut_Distance_B;
}SYS_CONF_t;
extern uint32_t bank;
extern SYS_CONF_t sys_conf_info;
extern BAT_Message_t BAT_Message;
// 写配置
void write_cfg(SYS_CONF_t *sys_config_info_t);
// 油门ADC
#define ACC_UP_Res 5.1 //上分压电阻（unit:KΩ)
#define ACC_DOWN_Res 5.1 //下分压电阻
// 电池ADC
#define BAT_UP_Res 68.0 //上分压电阻（unit:KΩ)
#define BAT_DOWN_Res 3.0 //下分压电阻
/*****************************速度************************/
// 管理员模式默认速度极限(0-100%)
#define M_DEFAULT_sLim 80
// 管理员模式默认速度极限(0-100%)
#define U_DEFAULT_sLim 60
/*****************************刹车************************/
// 默认自动刹车距离0~45dm(分米)
#define DEF_AUTO_Brake_Distance 10
// 默认自动减速距离0~45dm
#define DEF_AUTO_Speed_Cut_Distance 16
#endif